Special Aluminium Extrusion Profiles

What makes us special ... Again we just try harder!

No matter what profile you're looking for if you can think it we can produce it, probably even stock for you!
Our sole aim is to turn your ideas into reality... If in doubt give us a call we're here to help.

1. Complex machining of aluminium extrusion.

Complex Machining of Aluminium

This is one were really proud of, the picture shows complex machining performed by Inal Metals on one of our two 5 axis machines.
This part was machined from solid aluminium plate, by our 5 AXIS Tekna machining centre that can machine extrusions up to 8.5 metres long in 5 AXIS orientation.
This is a state of art machine and all enquiries are welcome because no job is too small and we machine one off complicated jobs on this machine.

2. Complex aluminium extrusion.

Complex aluminium extrusion Complex machining of aluminium extrusion

This set of pictures shows a multi-hollow aluminium extrusion that Inal Aluminium cut and mitre to length.
The extrusion is then fully machined on one of our smaller machining centres to very tight and accurate tolerances usually 0.1mm.
We then mask it in several places before powder coating and final silk screen printing is applied as the final process.
This aluminium extrusion is eventually used on high end inspection equipment and we also supply other parts to complete the machine.

3. Special aluminium extrusion for use on Point of sale equipment.

Point of Sale Complex Extrusion

These photographs show a special aluminium extrusion that Inal Aluminium manufacture for use in the point of sale industry.
We cut the section to length, fully machine it on our new VF9 machining centre.
We then mask the section and powder coat with a black textured finish; this is then delivered to the customer in special packaging.

4. Special extrusions designed as mating parts.

Extrusions Designed as Mating Parts

Want mating aluminium extrusions? Well you have come to the right supplier.
These pictures show that with the aid of a good design we can supply aluminium extrusions that slide, hinge or clip together.
We have our own in-house design engineer who ensures your ideas come to life.
These two parts fit perfectly together after we have extruded, cut to length, machined and anodised the extrusions. Watch out they might be monitoring you because their eventual use is as part of a CCTV security system.

5. Unusual finish on machined extrusion.

Unusual Finish on Machined Extrusion

Special finish you name it we can do it for you.
The pictures show a special aluminium extrusion and have been cut, machined and finished by a special process.
The section after machining is blasted using a stainless steel cut wire peening shot.
This hardens the surface which lengthens the life of the product and the rough texture give better grip as these parts are used to move large mobile units.

6. Complex aluminium extruded parts.

Aluminium Extruded Mating Parts

These pictures show a few of the multitude of special aluminium extrusions that we manufacture every year.
We have access to presses that can extrude less than 100g to 100kg per metre and from 10 kilo batches upwards.
Call us today to discover a world of opportunities in Aluminium.

Free Callback Request